Laser marking machine in micro processing industry can be considered a modicum of success, but it can only be considered a professional point of view at an early stage, there are more applications that can be excavated. Like some of the new material, such as consumer electronics, things like cell phones, the material is the demand on the iPad and laptop great, but also laser marking machine can flourish place.
But some are now currently difficult to resolve obstacles materials, like some new polymers for flexible displays will give the traditional processing techniques has brought no small challenge. Because the material itself is the traditional wavelength absorption rate is very low, there is tension, high sensitivity and other characteristics, laser marking machine processing out of the general effect is not high, and there is no way to do repeat the process. Also like the manufacture of automotive carbon fiber reinforced plastics such new lightweight material is also a challenge, and now currently ultrashort pulse laser is the most ideal tool.
The current trend is to pursue a shorter pulse width and higher peak power, which is both an advantage, because it can be realized some of the development of new technologies and applications, of course Why? Because high power ultrashort pulse laser allows processing of transparent material in some other large abnormal material, but on this ultra-high-power pulsed laser also implement a number of new technologies on the transparent material - carried out within in the glass eagles and extended depth of focus beam shaping and so on. In addition, the cold working can bring the best results in particular metal, most accurate precision, and if the high burning rate and bound together, then the pulse width slightly less than optimum efficiency can be obtained picoseconds, which is It is very rare.